superalloy

The anisotropy of compression creep strength in a nickel - base single crystal superalloy was investigated.

研究了 镍基 单晶高温合金压缩蠕变强度的各向异性.

The aluminized coating on K 438 superalloy was prepared by pack cementation.

采用固体粉末包埋渗铝法,在K438高温合金表面制备渗铝涂层.

Non hafnium superalloy DZ 4 , which is widely applied in service aero engines in present, is introduced.

介绍了目前在役发动机上使用最多的无铪定向凝固合金DZ4及其可铸性.

The test process of linear friction welding of GH 4169 superalloy was discussed.

论述了高温合金GH4169线性摩擦焊的试验过程.

NiCrAlY coatings were deposited on superalloy IC - 6 by arc ion plating ( AIP ) .

采用电弧离子镀技术在IC -6 高温合金上沉积 NiCrAlY 涂层.

This article studies a new type cobalt - base superalloy GH 941 including its composition, structures and mechanical properties.

本文研究了新型钴 基高温合金 GH941的成分 、 组织及性能.

The results can about qualitative analysis and semi - quantitative analysis of tungsten in superalloy.

研究结果可用于 高温合金 中钨元素的定性和半定量分析及材料牌号鉴别.

The most active research has been applied to aluminium, iron, copper based alloys and superalloy.

其中以铝基合金 、 铁基合金、高温合金及铜合金方面的研究最为活跃.

The results show that the cracks on the superalloy blades are resulted from surface recrystallization.

研究结果表明,定向凝固合金叶片的裂纹是由于叶片表面的再结晶而导致的.

The results show that hydrogenation can refine the aging microstructure of superalloy.

结果表明,氢的存在可以细化时效组织.

The porous superalloy material with oriented linear porosity was fabricated by metal powders sintering.

采用粉末烧结的方法制备了孔隙定向排列多孔高温合金材料.

And the microcomputer system has beensuccessfully used in the investigation of DD 3 SC superalloy solidification process.

并将该微机系统成功地用于DD3单晶高温合金凝固过程的研究.

The electrostatic separation method is studied in removing non - metal inclusion in powder superalloy.

研究了用静电分离法去除高温合金粉末中 非金属 夹杂.

The method for the physicochemical phase analysis of a directionally solidified Ni - based cast superalloy was studied.

系统研究了一种定向凝固镍基铸造高温合金的物理化学相分析方法.

A control - grain cast processing for integral turbine wheel of superalloy using mould agitation was successfully investigated.

研究了高温合金整体叶轮控晶铸造工艺方法.